RemoteCOM
C20 - C25 Ethernet 10/100MB Converters documentation
Data Sheet
C20 C21 C22 C23 C24 C25 Features Ethernet converter to RS232/RS485 ESD prote...
User Manual
RemoteCOM (C20 - C25)
Introduction
Hardware
RemoteCOM can be installed on any device from the Redisage C20 - C25 Ethernet Converters family...
Configuration by the Web Page
This page presents capabilities of the Ethernet Converters configuration. First of all, make su...
Configuration by the Telnet Console
The device can be also configured via the Telnet Console. Firstly, make sure that converter is ...
Configuration by the Serial Console
Another way to configure the device is via a serial console. In case of the C20 - C22 Ethernet ...
Redisage Configurator
Redisage Configurator is an app used to emulate connection between converter and a PC as if its...
FAQ
How to obtain an IP address of the device? The default static IP address of the device is 192....
Modes of Operation
RemoteCOM (C20 - C25)
TCP Socket Mode
This article presents a simple instruction of a first connection between a TCP client and a RS2...
UDP Socket Mode
This article presents a simple instruction of a first connection between a UDP client and a RS2...
Redisage Configurator Virtual COM Mode
This article presents a simple instruction of a first connection between a virtual COM port and...
Contact Us
Common Resources
Source of common resources used across the RemoteCOM documentation
Tables
Specifications Redisage PN C20 C21 C22 C23 C24 C25 ...
Commands
Ports configuration commands In terms of ports configuration it is possible to change parameters...
Procedures
Configuration by the Serial Console Procedure to enter serial console mode on C20 - C22 Turn ...
Introduction
RemoteCOM (C20 - C25) RemoteCOM is a complete hardware and software solution for creating remote...