Skip to main content

I2C Sensors (optional)

STM32 Open IoT and IIoT Gateways (P10 - P12)


There is a possibility of connecting peripheral I2C sensors. The board has dedicated pins for soldering devices. Below is a proposal for additional sensors that match the hardware.

  • LSM6DS33 - 3D accelerometer and 3D gyroscope
  • LIS3DH - 3-axis "nano" accelerometer
  • HTS221 - capacitive digital sensor for relative humidity and temperature measurements
  • SI7006-A20 / SI7020-A20 - humidity and temperature sensor

The presented devices are not included in the Open IoT Gateway.

Back to top