Data Sheet

RS485 HUBs (H01 - H03)

H01 H02 H03

Features

Isolated RS485 1:3 HUB
ESD protection for the RS485 data line
Power supply: +12 to +30 VDC or 24 VAC
3000 VDC isolation protection
Transmission speed up to 115200 bps
Tx, Rx and power LED indicators
RS485 embedded termination 120 ohm
Operating temperatures: -40°C to +75°C
DIN-rail mounting
Compact size - single module format (1M)
Dimensions: 90x56.4x17.5 mm
3 years warranty
Customization of OEM is welcomed

Introduction

The products from the H01-H03 family are reliable RS485 signal hubs made to work with variable transmission speeds. They allow flexible branching of the 1:3 interface while simultaneously protecting the attached devices thanks to internal 3 kV/DC galvanic isolation. Additionally, dedicated EMC protections will improve transmission quality and limit the impact of interference typical for an industrial environment.

Specifications

Redisage PN		H01	H02	H03
Input		1 x RS485 channel; Data+, Data-
Output		3 x RS485 channels; Data+, Data-
Power	Voltage	12-30 VDC / 24 VAC	12-30 VDC
Power	Power	< 1 W
Frame ground protection		yes
3000 VDC isolation		3-way	branched side	main side
Baud rate		up to 115200 bps
LED indicators		communication Tx, Rx and power
RS485 termination		120 ohm manually enabled
Connector	RS485	8-pin terminal block max. 2.5 mm² wire
Connector	Power	3-pin terminal block max. 2.5 mm² wire
Transmission distance	RS485	max. 1,200 m at 9.6 kbps; max. 400 m at 115.2 kbps (Belden 9841 2P twisted-pair cable, if diﬀerent cables are used, the transmission distance may change)
Mounting and enclosure		DIN rail, plastic PA - UL 94 V0, black/green
Temperatures		-40°C to +75°C operating and storage
Humidity		10 - 90% RH, non-condensing
ESD protection		±4 kV contact discharge / ±8 kV air discharge
Certification		CE, ~~RoHS~~RoHS, EMC, LVD
Norms		61000-6-2 - Immunity standard for industrial environments 61000-6-4 - Emission standard for industrial environments