Search Results

4G LTE Antennas (HSA-0727XXX) GSM LTE/4G antennas Product Frequency range VSWR Gain Polarization type Rated power Input impedance HSA-0727MS1 700-2700 MHz ≤ 2.0 5 dBi vertical 100 W 50 Ω HSA-0727TBF 700-2700 MHz...

Accessories (A01 - A06) A01 adapter Features DB9 male port with nuts 9-pin terminal block DB9 black ABS plastic enclosure Operating temperatures: -40°C to +75°C 2 years warranty Customization of OEM is welcomed A02 adapter ...

TCX IMX8   Features: Power: voltage 12-24 VDC +-20%, maximum power 25 W, reverse polarity protection SoM: VAR-SOM-MX8M-MINI Core: NXP’s i.MX 8M Mini with 1.6 GHz Quad-core ARM Cortex-A53 and 400 MHz Cortex-M4 real-time processor Timing:...

Connecting Tiger to a power supply Connect a power supply to the pins shown in the picture below. The suggested power supply is a DC voltage in range of 12-24 V. Connecting to a console In order to connect to the system console, follow this instruction....

Specifications of the device Power: voltage 12-24 VDC +-20%, maximum power 25 W, reverse polarity protection SoM: VAR-SOM-MX8M-MINI Core: NXP’s i.MX 8M Mini with 1.6 GHz Quad-core ARM Cortex-A53 and 400 MHz Cortex-M4 real-time processor Timing: 1.6 GHz...

Enclosure

USB The device is equipped with 2 USB connectors. USB1 MicroUSB connector for USB 2.0 is placed on the front panel. The interface can work in both host and device modes. The signal on the connector can be changed with a switch. T...

The device is equipped with multiple internal communication lines of the following types: SPI The device is equipped with the following SPI communication lines. SPI1 Signal Processor pin Default function Chip select...

View of the front panel Components of the front panel DIP switches The device has DIP switches on the front panel which enable the control of various key functions such as: booting mode choice microUSB signal choice choosing Linux con...

Expander A Part number: 74HC595BQ Expander A diagram Expander A pins description Pin Type Usage User-space name Description 1 Q1 DO1 gpiochip8 1 Digital output 1 2 ...

Principle of designating connector pins Each pin designation is composed of 2 parts. Part 1 Choose a letter stating the type and purpose of the connector, chosen individually with ease of use by the user in mind. General connectors D - digital input pin...

eMMC DIP switches positions To boot from the eMMC the DIP switch No. 1 needs to be in the position shown in the picture below. Power supply Connect a power supply to the pins shown in the picture below. The suggested power supply is a DC volt...

UART console Connecting the adapter to the device To display the console via UART an RS232 → USB adapter needs to be connected to the pins of the connector shown on the picture below. Configuring COM port A serial port terminal needs to be configured w...

Default user The default user in Tiger is the only one available after the first boot. login: root no password Create new users In order to list all existing users in the system use the following command: awk -F':' '{print $1}' /etc/passwd To add ...

System Image A system image (.swu file) is required for the update. The image is protected by the image checksum and by the image signature. That means a modified image will not be accepted by the device. Only images from our source allow for updates. It ...

Distribution Custom Linux distribution based on the Yocto Project. Type uname -a to check installed version, kernel, etc. Supported languages English (US) English (GB) User utilities Text editor The default available built-in text editor on the de...

To factory reset the device, you need to reinstall the current system version or perform an update. The entire process is detailed in the Updating section.

  If you would like to ask a specific question, please visit our Contact Us page for any further information.