Recently Updated Pages
Configuration by the Telnet Console
The device can be also configured via the Telnet Console. Firstly, make sure that converter is ...
Hardware
Modbus Gateway can be installed on any device from Redisage G01 - G03 and G14 - G16 Modbus Gate...
Hardware
RemoteCOM can be installed on any device from the Redisage C20 - C25 Ethernet Converters family...
FAQ
How to obtain an IP address of the device? The default static IP address of the device is 192....
Redisage Configurator
Redisage Configurator is an app used to emulate connection between converter and a PC as if its...
Configuration by the Telnet Console
The device can be also configured via the Telnet Console. Firstly, make sure that converter is ...
Introduction
RemoteCOM (C20 - C25) RemoteCOM is a complete hardware and software solution for creating remote...
Procedures
Configuration by the Serial Console Procedure to enter serial console mode on G01 - G03 Turn ...
Commands
Modbus ports configuration commands modbus modbus helpPrint command help. modbus int_addr ...
Introduction
Introduction
Commands
Ports configuration commands In terms of ports configuration it is possible to change parameters...
Procedures
Configuration by the Serial Console Procedure to enter serial console mode on C20 - C22 Turn ...