Skip to main content

System Console

{{@273#bkmrk-tiger-city-imx-embed}}

UART console

Connecting the adapter to the device

To display the console via UART an RS232 → USB adapter needs to be connected to the pins of the connector shown on the picture below.

image.pngimage.png

Configuring COM port

A serial port terminal needs to be configured with following configuration:

Bits per second

 115200
Data bits 8
Parity None
Stop bits 1

 Then, booting from the chosen source should be realized according to the instruction.

SSH console

Finding an IP of the device

The device's IP can be obtained via 2 methods:

  • connecting to the UART console and inputting the “ip a” command when logged as root or other user
  • using the joystick shown in the picture below the IP can be displayed on the front panel display

image.pngimage.png

Configuring COM port

The SSH terminal needs to be configured with the IP of the device. Then, booting from the chosen source should be realized according to the instruction.

Back to top