Skip to main content

System Console

{{@273#bkmrk-tiger-city-imx-embed}}

UART console

Connecting the adapter to the device

To display the console via UART an RS232 → USB adapter needs to be connected to the pins of the connector shown on the picture below.

//zmiana zdjęcia na dokładniejsze oznaczenia

//tabelka co do czego podłączyć

b6758290-e1b1-461b-b0b6-256eaf68e9be.png

Configuring COM port

A serial port terminal needs to be configured with a baud rate of 115200 bps. Then, a booting from the chosen source should be realized according to the instruction.

SSH console

Finding an IP of the device

The device's IP can be obtained via 2 methods:

  • connecting to the UART console and inputting the “ip a” command when logged as root or other user
  • using the joystick shown in the picture below the IP can be displayed on the front panel display

32bcff62-5de5-40ad-a4f6-7b507f3d7892.png

Configuring COM port

The SSH terminal needs to be configured with the IP of the device. Then, a booting from the chosen source should be realized according to the instruction.

Back to top