Skip to main content

Data Sheet

{{@273}}

TCX IMX8

 

image.png

Features:

  • Power: voltage 12-24 VDC +-20%, maximum power 25 W, reverse polarity protection
  • SoM: VAR-SOM-MX8M-MINI
  • Core: NXP’s i.MX 8M Mini with 1.6 GHz Quad-core ARM Cortex-A53 and 400 MHz Cortex-M4 real-time processor
  • Timing: 1.6 GHz
  • RAM: 2 GB DDR4
  • Flash eMMC: 16 GB
  • 1x microSD connector
  • 1x microHDMI 1.3a (optional)
  • 1x microUSB 2.0 HOST / OTG, max. 500 mA (optional)
  • 1x USB-A 2.0 HOST, max. 1 A
  • 1x modem GSM SIM7600E + microSIM (optional)
  • 1x 1-Wire (optional)
  • 7x DIO - digital input/output, max. 30 V
  • 4x UIO - universal analog-digital input/output (temperature measurement with sensors, e.g.: Pt1000, Ni1000, KTY, NTC, current, voltage and resistance sensors), max. 20 V (optional)
  • 5x DI - digital input (3 x DI), max. 30 V (optional)
  • 2x RS232, baudrate 50-115200 bps
  • 2x RS485, baudrate 50-115200 bps (4x optional)
  • 1x Ethernet 10/100 Mbps - RJ45 connector
  • 1x Wi-Fi® / 2.4G module (optional)
  • 1x secure element (optional)
  • 1x display OLED 0.87" 128x32 px black&white (optional)
  • 1x Joystick (optional)
  • RTC (optional), buzzer, EEPROM
  • TPM (optional)
  • Software watchdog

Specifications‎‎‎

Redisage PN

LCX01

LCX02

LCX03

LCX04

LCX05

LCX06

Power input

 12-24 VDC +-20%, maximum power 25 W, reverse polarity protection

System on Module

 VAR-SOM-MX8: NXP iMX8M-MINI

Core

 NXP’s i.MX 8M Mini with 1.6 GHz Quad-core ARM Cortex-A53 and 400 MHz Cortex-M4 real-time processor

Timing

 1.6 GHz

RAM

 2 GB DDR4

Flash eMMC

 16GB

Ports/

Connectors

RS232

2x

2x

2x

2x

2x

2x

terminal block max. 2.5 mm2 wire

max. 15 m at 115.2 kbps

RS485

2x

 2x

2x

2x

4x

4x
terminal block max. 2.5 mm2 wire
max. 1,200 m at 9.6 kbps; max. 400 m at 115.2 kbps

Digital Input

:x:

:x:

5x

5x

5x

5x

Digital Input/Output

7x

7x

7x

7x

7x

7x

Universal Input/Output

:x:

:x:

4x
(Current Input,

Voltage Input)

4x

(Current Input,

Voltage Input)

4x

(Current Input,

Voltage Input,
Current Output,
Resistance)

4x

(Current Input,

Voltage Input,
Current Output,
Resistance)

USB type A

:white_check_mark:

:white_check_mark:

:white_check_mark:

:white_check_mark:

:white_check_mark:

:white_check_mark:

microUSB

:x:

:x:

:x:

:x:

:white_check_mark:

:white_check_mark:

1-Wire

:x:

:x:

:white_check_mark:

:white_check_mark:

:white_check_mark:

:white_check_mark:

microHDMI

:x:

:x:

:x:

:x:

:white_check_mark:

:white_check_mark:

microSD

:white_check_mark:

:white_check_mark:

:white_check_mark:

:white_check_mark:

:white_check_mark:

:white_check_mark:

Ethernet

 10/100 Mb/s Base-T, RJ45 connector

Wi-Fi®

2.4/5 GHz 802.11b/g/n/ac

SMA Antenna connector

 :x: :x:

:white_check_mark:

:white_check_mark:

:white_check_mark:

:white_check_mark:

GSM

:x:

:white_check_mark:

:x:

:white_check_mark:

:x:

:white_check_mark:

Joystick

:x:

:x:

:white_check_mark:

:white_check_mark:

:white_check_mark:

:white_check_mark:

Display

OLED 0.87'' 128x32 px black&white

:x:

:x:

:white_check_mark:

:white_check_mark:

:white_check_mark:

:white_check_mark:

Watchdog

 Software WDT on external ESP32 microcontroller

Secure chip

:x:

:x:

:x:

:x:

:white_check_mark:

:white_check_mark:

TPM

:x:

:x:

:white_check_mark:

:white_check_mark:

:white_check_mark:

:white_check_mark:

RTC module

:x:

:x:

:white_check_mark:

:white_check_mark:

:white_check_mark:

:white_check_mark:

Buzzer

:white_check_mark:

:white_check_mark:

:white_check_mark:

:white_check_mark:

:white_check_mark:

:white_check_mark:

External Flash

:x:

:x:

:white_check_mark:

:white_check_mark:

:white_check_mark:

:white_check_mark:

EEPROM

:white_check_mark:

:white_check_mark:

:white_check_mark:

:white_check_mark:

:white_check_mark:

:white_check_mark:

Dimensions [mm]

 119 x 101 x 22.5

Certification

Norms

{{@274#bkmrk-placement-of-periphe}}

{{@274#bkmrk-}}

{{@169}}

Enclosure

The space that the device occupies can be approximated to a cube of the following dimensions: 119 mm x 101 mm x 35,3 mm.

{{@274#bkmrk--6}}

Norms

EMC standards

StandardTitleDescriptionComments
Emission
EN 61000-6-4Generic Emission StandardEmission standard for industrial environment
EN 55011Conducted EmissionLimits for Group 1, Class APower port
EN 55011Radiated EmissionLimits for Group 1, Class A
EN 55032Conducted EmissionLimits for Class AEthernet port
Immunity
EN 61000-6-2Generic Emission StandardImmunity standard for industrial environment
EN 61000-4-2Electrostatic discharge (ESD)±4kV (contact discharge), ±8kV (air discharge)
EN 61000-4-3Radio Frequency immunity10V/m
EN 61000-4-4Burst/EFT immunity±1kVAll ports
EN 61000-4-5Surge immunity±0.5kV (line-to-line), ±1kV (line-to-earth)Power port
EN 61000-4-29Voltage Dips, Short Interruptions and Voltage VariationsIn progressPower port


Climatic standards

StandardTitleDescriptionComments
EN 61131-2Product StandardProgrammable controllers - Part 2: Equipment requirements and tests
EN 60068-2-1Cold (storage)Cold test “storage” suitable for non-heat emitting products. The object of the test is limited to determining the suitability of the components, devices or products for transport or storage at low temperatures.
EN 60068-2-2Dry Heat (storage)Dry heat test “storage” suitable for non-heat emitting products. The object of the test is limited to determining the suitability of the components, devices or products for transport or storage at high temperatures.

EN 60068-2-1Cold (operation)Cold test “operation” suitable for heat emitting products. The object of the test is limited to determining the suitability of the components, devices or products for operation at low temperatures.
EN 60068-2-2Dry Heat (operation)Dry heat test “operation” suitable for heat emitting products. The object of the test is limited to determining the suitability of the components, devices or products for operation at high temperatures.
EN 60068-2-14Change of temperature (storage)The change of temperature test “storage” is suitable for non-heat emitting products. The objective of this test is limited to determining the suitability of the components, devices, or products for operation during temperature changes.
EN 60068-2-14Change of temperature (operation)The change of temperature test “operation” is suitable for heat emitting products. The objective of this test is limited to determining the suitability of the components, devices, or products for operation during temperature changes.
RedisageCold startCold start test is suitable for non-heat emitting products just before starting the device. The objective of this test is limited to determining the suitability of the devices for start in cold conditions.
EN 60068-2-30Damp Heat (storage)Damp heat test “storage” is suitable for non-heat emitting products. The objective of this test is limited to determining the suitability of the devices for transport or storage under cyclic damp heat conditions.
EN 60068-2-30Damp Heat (operation)Damp heat test “operation” is suitable for non-heat emitting products. The objective of this test is limited to determining the suitability of the devices for transport or storage under cyclic damp heat conditions.

{{@505}}

TCXV

Back to top