Skip to main content

Data Sheet

C10 C11 C12 C13

image.webp

Features

  • Automatic RS485 direction control
  • ESD protection for the RS232/485 data line
  • Power supply: +12 to +30 VDC or 24 VAC
  • 3000 VDC isolation protection on the RS-485 side
  • Transmission speed up to 115200 bps
  • Tx, Rx and power LED indicators
  • RS485 embedded termination 120 ohm
  • Operating temperatures: -40°C to +75°C
  • DIN-rail mounting
  • Compact size - single module format (1M)
  • Dimensions: 90x56.4x17.5 mm
  • 3 years warranty
  • Customization of OEM is welcomed

Introduction

Most industrial computer systems provide standard RS232 serial ports. Though widely accepted, RS232 has limited transmission speed, range, and networking capabilities.

The RS485 standards overcome these limitations by using differential voltage lines for data and control signals, which transparently convert RS232 signals into isolated RS485 signal with no need to change any hardware or software.

The C10 lets you easily build an industrial grade, a long-distance communication system using standard PC hardware.

The design of the isolation between the C10 - C12 is different. If the user wants to supply power from the PLC/PC, the C10 or C12 should be used, otherwise, the isolation will be broken.

Specification

Redisage PN

C10

C11

C12

C13

C14
Converter ports 1 x RS232 & 1 x RS485

Power

Voltage

12-30 VDC / 24 VAC

12-30 VDC

Passive

Power < 1W
Frame Ground Connection yes

Serial
Interface

RS232 TxD, RxD, GND
RS485 A, B

3000 VDC Isolation

3-way

on RS232 side

on RS485 side

 N/A

Baud rate

up to 115200 bps

LED indicators communication Tx, Rx, and power None
RS485 termination 120 ohm manually enabled None
Connector RS232 3 pin terminal block max. 2.5 mm2 wire DB9 Male Connector
RS485 3 pin terminal block max. 2.5 mm2 wire
Power 3 pin terminal block max. 2.5 mm2 wire None

Transmission
distance

RS485

max. 1,200 m at 9.6 kbps; max. 400 m at 115.2 kbps
(Belden 9841 2P twisted-pair cable, if different cables are used,
the transmission distance may change)

RS232 max. 15 m at 115.2 kbps
Mounting and enclosure DIN rail, plastic PA - UL 94 V0, black/green Compact
Temperatures -40°C to +75°C operating and storage
Humidity 10 - 90% RH, non-condensing

ESD protection

±4 kV contact discharge / ±8 kV air discharge

Certification  CE, RoHS

Applications

C10 - 3-way isolated