Skip to main content

Configuration by the Telnet Console‎

The device can be also configured via the Telnet Console. Firstly, make sure that converter is connected to the power supply and to the LAN using a patch cord. Knowledge of the device’s IP address (default is 192.168.100.100) and Telnet port number (default is 23) is necessary to establish a connection.

Use command below in a terminal window to connect to the device:

telnet <ip_address> <port_number>

If the connection is successful there will be a login prompt visible. Log in using user’s personal credentials or the default login details (login: admin, password: admin123). If login is successful, it will be possible to start typing configuration commands.

0e6873d5-31dd-4050-9c0b-e87fcaa271e4.png

The configuration is available only if devices are connected to the same Local Area Network as the computer used for it.

{{@170#bkmrk-list-of-all-commands}}

{{@170#bkmrk-command-description-}}

{{@171#bkmrk-ports-configuration--1}}

{{@171#bkmrk-in-terms-of-ports-co}}

{{@171#bkmrk-uart-uart-helpprint-}}

{{@171#bkmrk-network-settings}}

{{@171#bkmrk-the-following-comman}}

{{@171#bkmrk-ipconfig-ipconfig-ad}}

{{@171#bkmrk-changing-username-or}}

{{@171#bkmrk-to-change-username-o}}

{{@171#bkmrk-user-helpprint-the-h}}

    Additional notes

    After some time of inactivity, session will be disconnected automatically.

    In order to avoid issues like connecting to the host, type “help” to get more information.

    To get more details about every particular command, append “help” after each commands (example: "ipconfig help)help").

    Factory reset is not available from the Telnet Console level.