MBus 60-400 Converters & Reapeters Data Sheet

M-Bus Converters (C05 - C08)

C05 C06 C07 C08

Features

Serial ports RS232 and RS485
Up to 400 simultaneously connected slave devices
ESD protection for the RS232/485 data line
3000 VDC isolation protection
Power supply: +12 to +30 VDC or 24 VAC
Transmission speed up to 9600 bps
Tx, Rx, power and M-Bus load LED indicators
RS485 embedded termination 120 ohm
Operating temperatures: -40°C to +60°C
DIN-rail mounting
Dimensions: 90x56.4x35,6 mm
3 years warranty
Customization of OEM is welcomed

Introduction

C05 - C08 is a family of products that are reliable M-Bus electrical standard converters. They enable communication in master mode with many (60-400) simultaneously connected slave devices and can work as M-Bus repeaters letting to broaden the range of the interface, while simultaneously making the quality better and supporting the safety of the communication. Dedicated EMC integrated circuits guarantee improved connection quality by limiting the impact of interference typical for an industrial environment.

Specifications

		Redisage PN			C05	C06	C07	C08
Converter ports	Serial	1 x RS232 & 1 x RS485
	M-Bus master	up to 60 slaves	up to 120 slaves	up to 200 slaves	up to 400 slaves
	M-Bus slave	1 x M-Bus slave
Power	Voltage	12-30 VDC / 24 VAC
Power	Max. power	5 W	8 W	15 W	30 W
Frame ground connection		yes
Serial interface	RS232	TxD, RxD, GND
Serial interface	RS485	A, B
3000 VDC isolation side		RS232, RS485, M-Bus slave
Baud rate		up to 9600 bps
LED indicators		communication Tx, Rx, power, M-Bus load, error
RS485 termination		120 ohm manually enabled
Connector	RS232	3 pin terminal block max. 2.5 mm² wire
	RS485	3 pin terminal block max. 2.5 mm² wire
	Power	3 pin terminal block max. 2.5 mm² wire
	M-Bus	3 pin terminal block max. 2.5 mm² wire
Transmission Distance	RS485	max. 1,200 m at 9.6 kbps; max. 400 m at 115.2 kbps (Belden 9841 2P twisted-pair cable, if diﬀerent cables are used, the transmission distance may change)
	RS232	max. 15 m at 115.2 kbps
	M-Bus	see: M-Bus max. transmission distance
Mounting and enclosure		DIN rail, plastic PA - UL 94 V0, black/green
Temperatures		-40°C to +60°C operating and storage
Humidity		10 - 90% RH, non-condensing
ESD protection		±4 kV contact discharge / ±8 kV air discharge
Certification		CE, RoHS