M-Bus 10 Converters Data Sheet

C01 C02 C03 C04

Features

Serial ports RS232 and RS485
Up to 10 simultaneously connected slave devices
ESD protection for the RS232/485 data line
3000 VDC isolation protection
Power supply +12 to +30 VDC or 24 VAC
Transmission speed up to 9600 bps
Tx, Rx and power LED indicators
RS485 embedded termination 120 ohm
Operating temperatures: -40°C to +75°C
DIN-rail mounting
Compact size - single module format (1M)
Dimensions: 90x56.4x17.5 mm
3 years warranty
Customization of OEM is welcomed

Introduction

C01 - C04 family products are reliable M-Bus electrical standard converters. They enable communication in master mode with up to 10 simultaneously connected slave devices. Dedicated EMC integrated circuits guarantee improved connection quality by limiting the impact of interferences typical for an industrial environment.

Specifications

Redisage PN		C01	C02	C03	C04
Converter ports	Serial	1 x passive RS232	1 x active RS232	1 x RS485	1 x active RS232/RS485
Converter ports	M-Bus	1 x M-Bus master with up to 10 x slaves
Power	Voltage	12-30 VDC / 24 VAC
Power	Power	< 1W
Frame ground connection		yes
Serial interface	RS232	TxD, RxD, GND
	RS485	A, B
	M-Bus	MBus+, MBus -
3000 VDC isolation sIide		N/A	RS232	RS485	RS232/RS485
1000 VDC isolation sIide		RS232	N/A
Baud rate		up to 9600 bps
LED indicators		communication Tx, Rx, power
LED indicators		RS232 OK	N/A
RS485 termination		120 ohm manually enabled
Connector	RS232	3 pin terminal block max. 2.5mm² wire
	RS485	3 pin terminal block max. 2.5mm² wire
	Power	3 pin terminal block max. 2.5mm² wire
	M-Bus	3 pin terminal block max. 2.5mm² wire
Transmission distance	RS485	max. 1,200 m at 9.6 kbps; max. 400 m at 115.2 kbps (Belden 9841 2P twisted-pair cable, if diﬀerent cables are used, the transmission distance may change)
	RS232	max. 15 m at 115.2 kbps
	M-Bus	see: M-Bus max. transmission distance
Mounting and enclosure		DIN rail, plastic PA - UL 94 V0, black/green
Temperatures		-40°C to +75°C operating and storage
Humidity		10 - 90% RH, non-condensing
ESD protection		±4 kV contact discharge / ±8 kV air discharge
Certification		CE, RoHS

M-Bus max. transmission distance

Applications

C01 - MBus10 Converter to RS232

C02 - MBus10 Converter with active RS232 interface

C03 - MBus10 Converter to RS485

C04 - MBus10 Converter to RS232/RS485 with active RS232 interface

Frame ground FG

Electronic circuits are constantly prone to electrostatic discharge ESD.

Redisage Electronics modules feature a design for the frame ground terminal block FG.

The frame ground provides a path for bypassing ESD, which provides enhanced static protection ESD abilities and ensures the module is more reliable.

Connecting FG terminal block to the earth ground will bypass the ESD disturbances outside the device so will provide a better level of protection against ESD.

Frame Ground FG connection reference drawing is provided below.

If earth ground is not availabe FG can be left floating or it can be connected with power supply GND.

Pin assignments

C01

C02

C03

C04

Enclosure dimensions

1U Module Enclosure.

98 x 56.4 x 17.5

Units: mm.

Additional notes

Products family sample photo

https://redisage.com

DISCLAMER NOTES
ALL PRODUCT, PRODUCT SPECIFICATIONS, AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Related information and links
Ordering information	Accessories	Similar products