M-Bus 10 Converters Data Sheet

M-Bus Converters (C01 - C04)

C01 C02 C03 C04

Features Serial ports RS232 and RS485 Up to 10 simultaneously connected slave devices ESD protection for the RS232/485 data line 3000 VDC isolation protection Power supply: +12 to +30 VDC or 24 VAC Transmission speed up to 9600 bps Tx, Rx and power LED indicators RS485 embedded termination 120 ohm Operating temperatures: -40°C to +75°C DIN-rail mounting Compact size - single module format (1M) Dimensions: 90x56.4x17.5 mm 3 years warranty Customization of OEM is welcomed

Introduction

C01 - C04 family products are reliable M-Bus electrical standard converters. They enable communication in master mode with up to 10 simultaneously connected slave devices. Dedicated EMC integrated circuits guarantee improved connection quality by limiting the impact of interferences typical for an industrial environment.

Specifications

Redisage PN		C01	C02	C03	C04
Converter ports	Serial	1 x passive RS232	1 x active RS232	1 x RS485	1 x active RS232/RS485
	M-Bus	1 x M-Bus master with up to 10 x slaves
Power	Voltage	12-30 VDC / 24 VAC
	Power	< 1 W
Frame ground connection		yes
Serial interface	RS232	TxD, RxD, GND
	RS485	A, B
	M-Bus	MBus+, MBus -
3000 VDC isolation side		N/A	RS232	RS485	RS232/RS485
1000 VDC isolation side		RS232	N/A
Baud rate		up to 9600 bps
LED indicators		communication Tx, Rx, power
		RS232 OK	N/A
RS485 termination		120 ohm manually enabled
Connector	RS232	3 pin terminal block max. 2.5 mm2 wire
	RS485	3 pin terminal block max. 2.5 mm2 wire
	Power	3 pin terminal block max. 2.5 mm2 wire
	M-Bus	3 pin terminal block max. 2.5 mm2 wire
Transmission distance	RS485	max. 1,200 m at 9.6 kbps; max. 400 m at 115.2 kbps (Belden 9841 2P twisted-pair cable, if different cables are used, the transmission distance may change)
	RS232	max. 15 m at 115.2 kbps
	M-Bus	see: M-Bus max. transmission distance
Mounting and enclosure		DIN rail, plastic PA - UL 94 V0, black/green
Temperatures		-40°C to +75°C operating and storage
Humidity		10 - 90% RH, non-condensing
ESD protection		±4 kV contact discharge / ±8 kV air discharge
Certification		CE, RoHS

M-Bus max. transmission distance

Variants

C01 - MBus10 Converter to RS232

C02 - MBus10 Converter with active RS232 interface

C03 - MBus10 Converter to RS485

C04 - MBus10 Converter to RS232/RS485 with active RS232 interface

{{@169}}

Pin assignments

C01	C02
C03	C04

Enclosure{{@221#bkmrk-enclosure-dimensions}}

dimensions

{{@221#bkmrk-1u-module-enclosure.}}

{{@221#bkmrk-}}

1U Module Enclosure.

98 x 56.4 x 17.5

Units: mm.

{{@168}}

SC-D