System Console

Tiger City IMX Industrial Computer with Linux OS 

 UART console 

 Connecting the adapter to the device 

 To display the console via UART an RS232 → USB adapter needs to be connected to the pins of the connector shown on the picture below. 

 

 Configuring COM port 

 A serial port terminal needs to be configured with following configuration: 

 

 

 

 

 Bits per second 

 

 115200 

 

 

 Data bits 

 8 

 

 

 Parity 

 None 

 

 

 Stop bits 

 1 

 

 

 

  Then, booting from the chosen source should be realized according to the instruction . 

 SSH console 

 Finding an IP of the device 

 The device's IP can be obtained via 2 methods: 

 

 connecting to the UART console and inputting the “ip a” command when logged as root or other user 

 using the joystick shown in the picture below the IP can be displayed on the front panel display 

 

 

 Configuring COM port 

 The SSH terminal needs to be configured with the IP of the device. Then, booting from the chosen source should be realized according to the instruction .