Data Sheet Tiger City IMX Industrial Computer with Linux OS The Tiger City IMX minicomputer uses Linux operating systems and is equipped with several communication interfaces such as: Ethernet, USB 2.0, HDMI, GSM, RS232, RS485, 1-Wire and multiple analog-digital inputs and outputs. It can also be configured to include a Wi-Fi module and encryption modules that increase the security of the device. The casing enables installation on the DIN rail. The front panel has switches, an OLED display and a joystick for manual control of the device operation. TCX IMX8   Features: Power: voltage 12-24 VDC +-20%, maximum power 25 W, reverse polarity protection SoM: VAR-SOM-MX8M-MINI Core: NXP’s i.MX 8M Mini with 1.6 GHz Quad-core ARM Cortex-A53 and 400 MHz Cortex-M4 real-time processor Timing: 1.6 GHz RAM: 2 GB DDR4 Flash eMMC: 16 GB 1x microSD connector 1x microHDMI 1.3a (optional) 1x microUSB 2.0 HOST / OTG, max. 500 mA (optional) 1x USB-A 2.0 HOST, max. 1 A 1x modem GSM SIM7600E + microSIM (optional) 1x 1-Wire (optional) 7x DIO - digital input/output, max. 30 V 4x UIO - universal analog-digital input/output (temperature measurement with sensors, e.g.: Pt1000, Ni1000, KTY, NTC, current, voltage and resistance sensors), max. 20 V (optional) 3x/5x DI - digital input max. 30 V (optional) 2x RS232, baudrate 50-115200 bps 2x RS485, baudrate 50-115200 bps (4x optional) 1x Ethernet 10/100 Mbps - RJ45 connector 1x Wi-Fi® / 2.4G module (optional) 1x secure element (optional) 1x display OLED 0.87" 128x32 px black&white (optional) 1x Joystick (optional) RTC (optional), buzzer, EEPROM TPM (optional) Software watchdog Specifications‎‎‎ Redisage PN LCX01 LCX02 LCX03 LCX04 LCX05 LCX06 Version Light Light GSM Basic Basic GSM Max Max GSM Power input 12-24 VDC +-20%, maximum power 25 W, reverse polarity protection System on Module VAR-SOM-MX8: NXP iMX8M-MINI Core NXP’s i.MX 8M Mini with 1.6 GHz Quad-core ARM Cortex-A53 and 400 MHz Cortex-M4 real-time processor Timing 1.6 GHz RAM 2 GB DDR4 Flash eMMC 16GB Ports/ Connectors RS232 2x 2x 2x 2x 2x 2x terminal block max. 2.5 mm 2 wire max. 15 m at 115.2 kbps RS485 2x 2x 2x 2x 4x 4x terminal block max. 2.5 mm 2 wire max. 1,200 m at 9.6 kbps; max. 400 m at 115.2 kbps Digital Input 5x 3x 5x 3x Digital Input/Output 7x 7x 7x 7x 7x 7x Universal Input/Output 4x (Current Input, Voltage Input) 4x (Current Input, Voltage Input) 4x (Current Input, Voltage Input, Current Output, Resistance) 4x (Current Input, Voltage Input, Current Output, Resistance) USB type A microUSB 1-Wire microHDMI microSD Ethernet 10/100 Mb/s Base-T, RJ45 connector Wi-Fi ® 2.4/5 GHz 802.11b/g/n/ac SMA Antenna connector GSM Joystick Display OLED 0.87'' 128x32 px black&white Watchdog Software WDT on external ESP32 microcontroller Secure chip TPM RTC module Buzzer External Flash EEPROM OS Embedded Linux Dimensions [mm] 119 x 101 x 22.5 Work temperature [°C] -40 to +75 Certification CE, RoHS, ... Norms Check here Placement of peripherals Frame ground FG Electronic circuits are constantly prone to electrostatic discharge ESD. Redisage Electronics modules feature a design for the frame ground terminal block FG. The frame ground provides a path for bypassing ESD, which provides enhanced static protection ESD abilities and ensures the module is more reliable. Connecting FG terminal block to the earth ground will bypass the ESD disturbances outside the device so will provide a better level of protection against ESD. Frame Ground FG connection reference drawing is provided below. If earth ground is not available FG can be left floating or it can be connected with the power supply GND. Enclosure The space that the device occupies can be approximated to a cube of the following dimensions: 119 mm x 101 mm x 35,3 mm. Norms EMC standards Standard Title Description Comments Emission EN 61000-6-4 Generic Emission Standard Emission standard for industrial environment EN 55011 Conducted Emission Limits for Group 1, Class A Power port EN 55011 Radiated Emission Limits for Group 1, Class A EN 55032 Conducted Emission Limits for Class A Ethernet port Immunity EN 61000-6-2 Generic Emission Standard Immunity standard for industrial environment EN 61000-4-2 Electrostatic discharge (ESD) ± 4kV (contact discharge),  ± 8kV (air discharge) EN 61000-4-3 Radio Frequency immunity 10V/m EN 61000-4-4 Burst/EFT immunity ± 1kV All ports EN 61000-4-5 Surge immunity ±0.5kV (line-to-line), ±1kV (line-to-earth) Power port EN 61000-4-29 Voltage Dips, Short Interruptions and Voltage Variations In progress Power port Climatic standards Standard Title Description Comments EN 61131-2 Product Standard Programmable controllers - Part 2: Equipment requirements and tests EN 60068-2-1 Cold (storage) Cold test “storage” suitable for non-heat emitting products. The object of the test is limited to determining the suitability of the components, devices or products for transport or storage at low temperatures. EN 60068-2-2 Dry Heat (storage) Dry heat test “storage” suitable for non-heat emitting products. The object of the test is limited to determining the suitability of the components, devices or products for transport or storage at high temperatures. EN 60068-2-1 Cold (operation) Cold test “operation” suitable for heat emitting products. The object of the test is limited to determining the suitability of the components, devices or products for operation at low temperatures. EN 60068-2-2 Dry Heat (operation) Dry heat test “operation” suitable for heat emitting products. The object of the test is limited to determining the suitability of the components, devices or products for operation at high temperatures. EN 60068-2-14 Change of temperature (storage) The change of temperature test “storage” is suitable for non-heat emitting products. The objective of this test is limited to determining the suitability of the components, devices, or products for operation during temperature changes. EN 60068-2-14 Change of temperature (operation) The change of temperature test “operation” is suitable for heat emitting products. The objective of this test is limited to determining the suitability of the components, devices, or products for operation during temperature changes. Redisage Cold start Cold start test is suitable for non-heat emitting products just before starting the device. The objective of this test is limited to determining the suitability of the devices for start in cold conditions. EN 60068-2-30 Damp Heat (storage) Damp heat test “storage” is suitable for non-heat emitting products. The objective of this test is limited to determining the suitability of the devices for transport or storage under cyclic damp heat conditions. EN 60068-2-30 Damp Heat (operation) Damp heat test “operation” is suitable for non-heat emitting products. The objective of this test is limited to determining the suitability of the devices for transport or storage under cyclic damp heat conditions. Additional notes Wi-Fi® is a registered trademark of Wi-Fi Alliance®. Related information and links Ordering information Accessories Similar products Products family sample photo https://redisage.com DISCLAMER NOTES ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Datasheet-ID:  TCXV