Booting

Tiger City IMX Industrial Computer with Linux OS 

 

 eMMC 

 SD card 

 Booting after the power-off command 

 

 eMMC 

 DIP switches positions 

 To boot from the eMMC the DIP switch No. 1 needs to be in the position shown in the picture below. 

 

 Power supply 

 Connect a power supply to the pins shown in the picture below. The suggested power supply is a DC voltage in the range of 12-24 V. 

 

 First boot 

 The connected power supply should initiate the first boot. 

 Console 

 Booting logs are displayed in the console, indicating a proper boot from the eMMC, as shown in the picture below. 

 

 SD card 

 DIP switches positions 

 To boot from the SD card the DIP switch No. 1 needs to be in the position shown in the picture below. 

 

 Power supply 

 Connect a power supply to the pins shown in the picture below. The suggested power supply is a DC voltage in the range of 12-24 V. 

 

 First boot 

 The connected power supply should initiate the first boot. 

 Console 

 Booting logs are displayed in the console. 

 Booting after the power-off command 

 If the device is turned off by inputting the power-off command in the terminal, the previous boot methods have to be initiated via the reset button placed on the front panel. Its placement is shown in the picture below.