# Booting
## {{@273#bkmrk-tiger-city-imx-embed}}
- [{{@143#bkmrk-emmc}}](https://doc.redisage.com/link/143#bkmrk-emmc)
- [{{@143#bkmrk-sd-card}}](https://doc.redisage.com/link/143#bkmrk-sd-card)
- [{{@143#bkmrk-booting-after-the-po}}](https://doc.redisage.com/link/143#bkmrk-booting-after-the-po)
### eMMC
#### DIP switches positions
To boot from the eMMC the DIP switch No. 1 needs to be in the position shown in the picture below.
#### Power supply
Connect a power supply to the pins shown in the picture below. The suggested power supply is a DC voltage in the range of 12-24 V.
{{@274#bkmrk--2}}
#### First boot
The connected power supply should initiate the first boot.
#### Console
Booting logs are displayed in the console, indicating a proper boot from the eMMC, as shown in the picture below.
[](https://doc.redisage.com/uploads/images/gallery/2024-04/7e5e81cf-604f-4a14-853d-2bd09f1da13a.png)
### SD card
#### DIP switches positions
To boot from the SD card the DIP switch No. 1 needs to be in the position shown in the picture below.
#### Power supply
Connect a power supply to the pins shown in the picture below. The suggested power supply is a DC voltage in the range of 12-24 V.
{{@274#bkmrk--2}}
#### First boot
The connected power supply should initiate the first boot.
#### Console
Booting logs are displayed in the console.
### Booting after the power-off command
If the device is turned off by inputting the power-off command in the terminal, the previous boot methods have to be initiated via the reset button placed on the front panel. Its placement is shown in the picture below.
[](https://doc.redisage.com/uploads/images/gallery/2026-03/JpQimage.png)
