# Hardware ## {{@264#bkmrk-open-iot-and-iiot-ga}} ### Features
**Features** [![image.png](https://doc.redisage.com/uploads/images/gallery/2024-06/scaled-1680-/4Qcimage.png)](https://doc.redisage.com/uploads/images/gallery/2024-06/4Qcimage.png)
Open IoT gateway
ESD protection for the RS485 data line
Power supply: +12 to +30 VDC
Transmission speed up to 115200 bps
Tx, Rx and power LED indicators
RS485 embedded termination 120 ohm
Operating temperatures: -40°C to +75°C
DIN-rail mounting
Dimensions: 98x56.4x22.5 mm
**3 years warranty**
**Customization of OEM is welcomed**
{{@169}} ### {{@263#bkmrk-specifications%E2%80%8E%E2%80%8E%E2%80%8E}} {{@263#bkmrk-redisage-pn-p01-p02-}} ### LED indicators
**Gateways P10 - P12**
[![image.png](https://doc.redisage.com/uploads/images/gallery/2024-06/scaled-1680-/Llbimage.png)](https://doc.redisage.com/uploads/images/gallery/2024-06/Llbimage.png)
**LED indicator****Color****Function**
PWBluePower
L1GreenLED 1
L2GreenLED 2
L3YellowLED 3
L4RedLED 4
L5RedLED 5
### {{@263#bkmrk-pin-assignments}} {{@263#bkmrk-p01-%C2%A0-p02-%C2%A0}} ### Board overview The complete Open IoT and IIoT Gateway kit consists of: - developer module - power supply module - RJ45 network adapter - hardware programmer (TagConnect + adapter for ST-LINK) #### Main Board [![image.png](https://doc.redisage.com/uploads/images/gallery/2025-02/scaled-1680-/ginimage.png)](https://doc.redisage.com/uploads/images/gallery/2025-02/ginimage.png) #### Power Supply Board [![image.png](https://doc.redisage.com/uploads/images/gallery/2025-02/scaled-1680-/ZGqimage.png)](https://doc.redisage.com/uploads/images/gallery/2025-02/ZGqimage.png) #### Power input & RS232/RS485 ports [![image.png](https://doc.redisage.com/uploads/images/gallery/2025-02/scaled-1680-/w9yimage.png) ](https://doc.redisage.com/uploads/images/gallery/2025-02/w9yimage.png)[![image.png](https://doc.redisage.com/uploads/images/gallery/2025-02/scaled-1680-/zsFimage.png)](https://doc.redisage.com/uploads/images/gallery/2025-02/zsFimage.png) - **Vcc1**, **Vcc2** - power supply input 12-30 VDC - **FG** - frame ground - **GND** - power supply ground

RS232/RS485 ports depend on the device variant.

#### Ethernet To support the Ethernet network interface communication, the network adapter available in the kit must be installed on the module (pay attention to its correct installation). This interface is supported by the external IP101G physical layer which communicates with the STM32 microcontroller. [![image.png](https://doc.redisage.com/uploads/images/gallery/2025-02/scaled-1680-/CEIimage.png)](https://doc.redisage.com/uploads/images/gallery/2025-02/CEIimage.png) [![image.png](https://doc.redisage.com/uploads/images/gallery/2025-02/scaled-1680-/JUVimage.png)](https://doc.redisage.com/uploads/images/gallery/2025-02/JUVimage.png)