Peripherals

RGB LED
STM32 Open IoT and IIoT Gateways (P10 - P12) 

 

 The Gateway is equipped with 5 RGB user LEDs. 4 are mounted directly to the board, and the fifth is next to the not-programmable blue power LED on the PSU board.

Switch
STM32 Open IoT and IIoT Gateways (P10 - P12) 

 

 The Open IoT Gateway contains a tactile switch mounted to the PSU board, which can be programmed directly in the MCU.

RS232 and RS485
STM32 Open IoT and IIoT Gateways (P10 - P12) 

 

 The Gateway has 4 RS232/RS485 sockets depending on the version. 

   

 P10 (4x RS232) 

 The P10 gateway is equipped with 2x ST3232BTR to ensure transmission in RS232 standard. 

 

 

 

 P11 (4x RS485) 

 The P11 gateway is equipped with 2x MAX481CSA to ensure transmission in RS485 standard. 

 

 

 

 

 

 

 P12 (2x RS232, 2x RS485) 

 The P12 gateway is equipped with 1x ST3232BTR and 2x MAX481CSA to ensure transmission both in RS232 and RS485 standardsm

Ethernet PHY
STM32 Open IoT and IIoT Gateways (P10 - P12) 

 

 The Ethernet interface is provided by the IP101G physical layer. An external board with an RJ45 socket ensures a wired connection to the network.

MicroUSB
STM32 Open IoT and IIoT Gateways (P10 - P12) 

 

 MicroUSB ensures access straight to UART interface (UART4). The Open IoT Gateway does not have inbuild FTDI converter so an external USB to UART FTDI converter is needed to run a serial port monitor on a PC.

I2C EEPROM
STM32 Open IoT and IIoT Gateways (P10 - P12) 

 

 The Open IoT Gateway has a built-in Serial EEPROM with a secure element connected to the STM32 via I2C bus.

Serial Flash
STM32 Open IoT and IIoT Gateways (P10 - P12) 

 

 The Gateway has a Serial flash memory which can be programmed via SPI.

I2C Sensors (optional)
STM32 Open IoT and IIoT Gateways (P10 - P12) 

 

 There is a possibility of connecting peripheral I2C sensors. The board has dedicated pins for soldering devices. Below is a proposal for additional sensors that match the hardware. 

 

 

 

 LSM6DS33 - 3D accelerometer and 3D gyroscope 

 LIS3DH - 3-axis "nano" accelerometer 

 HTS221 - capacitive digital sensor for relative humidity and temperature measurements 

 SI7006-A20 / SI7020-A20 - humidity and temperature sensor 

 

 The presented devices are not included in the Open IoT Gateway.