# Data Sheet ## RS232 RS485 Converters (C10 - C13)
**C10 C11 C12 C13** **[![image.webp](https://doc.redisage.com/uploads/images/gallery/2024-03/scaled-1680-/ewximage.webp)](https://doc.redisage.com/uploads/images/gallery/2024-03/ewximage.webp)** **Features** - Automatic RS485 direction control - ESD protection for the RS232/485 data line - Power supply: +12 to +30 VDC or 24 VAC - 3000 VDC isolation protection on the RS-485 side - Transmission speed up to 115200 bps - Tx, Rx and power LED indicators - RS485 embedded termination 120 ohm - Operating temperatures: -40°C to +75°C - DIN-rail mounting - Compact size - single module format (1M) - Dimensions: 90x56.4x17.5 mm - 3 years warranty - Customization of OEM is welcomed
### Introduction Most industrial computer systems provide standard RS232 serial ports. Though widely accepted, RS232 has limited transmission speed, range, and networking capabilities. The RS485 standards overcome these limitations by using differential voltage lines for data and control signals. The C10 makes it easy to build an industrial-grade, long-distance communication system using standard PC hardware, as it converts RS232 signals into isolated RS485 signals without any need to change any hardware or software. The design of the isolation between the C10 - C12 is different. If the user wants to supply power from the PLC/PC, the C10 or C12 should be used, otherwise, the isolation will be broken. ### Specification
**Redisage PN** **C10****C11****C12****C13**
Converter ports 1 x RS232 & 1 x RS485
Power Voltage12-30 VDC / 24 VAC 12-30 VDC
Power< 1 W
Frame ground protection yes
Serial interface RS232TxD, Rx, GND
RS485A, B
3000 VDC isolation 3-wayon RS232 sideon RS485 sideN/A
Baud rate up to 115200 bps
LED indicators communication Tx, Rx and power
RS485 termination 120 ohm manually enabled
Connector RS2323-pin terminal block max. 2.5 mm2 wire
RS4853-pin terminal block max. 2.5 mm2 wire
Power3-pin terminal block max. 2.5 mm2 wire
Transmission distance RS485max. 1,200 m at 9.6 kbps; max. 400 m at 115.2 kbps (Belden 9841 2P twisted-pair cable, if different cables are used, the transmission distance may change)
RS232max. 15 m at 115.2 kbps
Mounting and enclosure DIN rail, plastic PA - UL 94 V0, black/green
Temperatures-40°C to +75°C operating and storage
Humidity10 - 90% RH, non-condensing
ESD protection ±4 kV contact discharge / ±8 kV air discharge
Certification CE, RoHS, EMC, LVD
Norms 61000-6-2 - Immunity standard for industrial environments 61000-6-4 - Emission standard for industrial environments
### Variants #### C10 - THREE-WAY Isolated
#### C11 - RS232 Isolated Side
#### C12 - RS485 Isolated Side
#### C13 - Non-isolated (Active)
{{@169}} ### Pin assignments
**C10** **[![image (1).webp](https://doc.redisage.com/uploads/images/gallery/2024-03/scaled-1680-/fLdimage-1.webp)](https://doc.redisage.com/uploads/images/gallery/2024-03/fLdimage-1.webp)** **C11** **[![image (2).webp](https://doc.redisage.com/uploads/images/gallery/2024-03/scaled-1680-/71Limage-2.webp)](https://doc.redisage.com/uploads/images/gallery/2024-03/71Limage-2.webp)**
**C12** **[![image (3).webp](https://doc.redisage.com/uploads/images/gallery/2024-03/scaled-1680-/Qi2image-3.webp)](https://doc.redisage.com/uploads/images/gallery/2024-03/Qi2image-3.webp)** **C13** **[![image (4).webp](https://doc.redisage.com/uploads/images/gallery/2024-03/scaled-1680-/TEHimage-4.webp)](https://doc.redisage.com/uploads/images/gallery/2024-03/TEHimage-4.webp)**
### {{@221#bkmrk-enclosure-dimensions}} {{@221#bkmrk-1u-module-enclosure.}} {{@221#bkmrk-}} {{@168}} SC-D